The 2GIG Smoke Heat Freeze Detectors are designed to recognize smoke from common synthetic materials and decrease nuisance alarms from everyday cooking. Using advanced detection algorithms and a sophisticated photo-electric optical sensor, these two detectors meet the new UL standards for the year 2020*. Smoke Alarm Standards bring 250 new technological changes to traditional smoke detection. Meeting the new UL standards, the 2GIG Smoke Heat Freeze Detector provides increased performance and better detection of smoke, including smoke from common synthetic materials found in home furnishings. These synthetic materials generally have a faster burn rate reducing escape time from an average of 17 minutes to 3-4 minutes. Traditional smoke detectors trigger an alarm when any smoke density reaches a specific level, which could have just been normal cooking events. The 2GIG Smoke Heat Freeze Detector uses advanced algorithms and a sophisticated optical chamber to improve the detection of smoke particles created by some synthetic materials, separate from organic smoke associated with normal cooking events. The new technology is designed to trigger an alarm faster when synthetic smoke is detected versus smoke from cooking, adding to safety and peace of mind.

Meets new UL217 8th edition and UL268 7th edition requirements. Designed to recognize smoke from some synthetic materials to decrease the time of alerts for safety. Monitors and reports on excessive temperature variations. Optical smoke detection chamber for improved smoke detection. A rate of rise alert is sent to the panel and a siren is triggered once the room temperature is 104 ̊F and the temperature rises 15 degrees or more in one minute. Extreme high/low-temperature alerts provide total coverage. Long-lasting battery with a projected life of 10 years for fewer service calls.

2GIG TILT1E-345 eSeries Enhanced Wireless Tilt Sensor

Reduce the risk of takeovers with eSeries Encrypted technology. The sensor (Model 2GIG-TILT1e-345) is designed for applications where the tilt status of an asset, such as a garage door, needs to be monitored. Other uses might include mailbox doors, large pet doors, or hinged storm cellar doors. The tilt sensor communicates with the control panel using the 345 MHz frequency. Once the sensor is tilted to 45 degrees, the sensor will transmit to the panel. The sensor will also send a restore signal when the sensor is returned to less than 45 degrees. The 2GIG-TILT1e-345 is equipped with a cover tamper switch and low battery monitoring. If the Tilt Sensor is removed for any reason, the radio transmitter will send a tamper alert. Should the battery voltage drop below a prescribed level, the sensor will send a low battery report indicating that the battery should be replaced. The 2GIG-TILT1e-345 is compatible with GC2e firmware revisions 1.14 and higher.

Encrypted Protocol for Enhanced Security; Encrypted Wireless Tilt Sensor; Sensor transmits alert when tipped 45° off vertical; Restore signal sent when sensor returned to less than 45°; Requires GC2e panel firmware revision 1.14 or higher; Long life lithium battery included; Screw, adhesive mount hw. included.

2GIG PIR1E-345 eSeries Enhanced Passive Infrared Motion Detector with Pet Immunity

The 2GIG-PIR1E-345 is a wireless, eSeries encrypted, motion detector that features a wide 30' X 50' foot wide area of coverage when set to high (HI) sensitivity mode. With the 2GIG-PIR1E-345, you can even arm your 2GIG security system with pets in your house because the sensor includes passive infrared technology for pet immunity up to 55 pounds. The 2GIG-PIR1E-345 communicates with the 2GIG GC2e and GC3e control panels using the 345MHz frequency. Additionally, the PIR1E-345 is tamper-proof and will send an immediate alert if anyone ever tries to tamper with the detector or break it.

2GIG GB1E-345 eSeries Enhanced 360-Degree Glass Break Detector

The 2GIG-GB1E-345 is a wireless, eSeries encrypted, glass break detector that uses audio sensors that detect the sound of glass breaking. The GB1E-345 is fully supervised, tamper-protected, and easy to mount on either a ceiling or wall. With a 360° maximum horizontal sensing angle, the GB1E-345 provides a wider coverage area than any normal door and window sensor. The GB1E-345 can detect the sound frequency of glass breaking up to 15 feet (4.6m) maximum distance range using a dual-stage technology. Making the GB1E a great option for covering multiple windows in an area, with only one device. This encrypted glass break detector communicates with the 2GIG GC2e and GC3e control panels using the 345MHz frequency. The 2GIG-GB1E-345 glass break sensor is disguised as a smoke detector to ensure that it will stay hidden from any potential intruders.

2GIG DW10E-345 eSeries Enhanced Thin Door Window with External Contact Support

The Thin Door/Window Contact is designed for use on doors, windows, and other objects that open and close. It communicates with the control panel using the 345MHz frequency. When the magnet (which is mounted near the sensor) moves away from or closer to the door contact’s sensor, signals are transmitted to the control panel.